Online IBM Certification Exam Braindumps

How good is pass4sure?do you hear of the pass4sure?If you usually pay attention to IT exam Certification and dona??t hear pass4sure,ita??s a great pity.Pass4sure ia a website for all the candidate about exam IT exam,for example the cisco 000-356 exam.Pass4sure share 128 questions and answers for us.100% come?? from real exam.

1.Use the following information to answer this question:
????????????
?????? Printer TBMPT20 is not printing.
???????????????????????????????????????????? Description?????????????????? Status
???????????????????????????????????????????? ACHTRCTL?????????????????? VARIED OFF
???????????????????????????????????????????? ACHTRDEV?????????????????? VARIED OFF
???????????? ??????????????????????????????????BSC2300???????????????????????? VARIED OFF
???????????????????????????????????????????? BSC230000?????????????????? VARIED OFF
???????????????????????????????????????????????????? CTL01???????????????????????? ACTIVE
???????????????????????????????????????????????????????? DSP01???????????????????? SIGNON DISPLAY
???????????????????????????????????????????????????????? DSP99???????? ????????????SIGNON DISPLAY
???????????????????????????????????????????????? TBMWS01???????????????? SIGNON DISPLAY
?????????????????????????????????????????????????? TBMPT20???????????????? FAILED
Given the above information on the WRKCFGSTS *CTL screen, what action must the operator take to bring the printer on-line, without affecting other devices?
A: Vary on printer TBMPT20
B: Vary on controller CTL01
C: Vary off, then vary on printer TBMPT20
D: Vary off, then vary on controller CTL01
Correct Answers:?? C
2.Which of the following menus is used to schedule system shut down and start up?
A: POWER
B: JOBSCD
C: BACKUP
D: CONFIG
Correct Answers:?? A
3.PC users are trying to connect to an iSeries via ETH1 and cannot get the terminal emulator to display a signon screen.?? There are multiple Ethernet lines configured on the system.?? The Ethernet line and controller are active for ETH1, and the device is varied on. What needs to be done to change the status of the device to active without disrupting Ethernet connections and traffic on other lines?
A: Restart TCP/IP
B: IPL the system
C: Start the TCP/IP interface for the line
D: Vary off the Ethernet line and vary it back on
Correct Answers:?? C
4.An IPL is planned to occur immediately after the last interactive job has ended.?? Which of the following commands would be used to achieve this?
A: ENDSYS OPTION(*IMMED)
B: ENDSYS OPTION(*CNTRLD)
C: PWRDWNSYS OPTION(*CNTRLD)
D: PWRDWNSYS OPTION(*IMMED)
Correct Answers:?? C
5.An operator was directed to save the INVOICE02 file on the tape already loaded in the TAP01 tape drive.?? The following message was received:
?????? Cannot allocate device TAP01
How should the operator proceed to determine why the tape was not available?
A: Determine if the tape drive is powered on
B: Use DSPTAP TAP01 to determine tape availablity
C: Use WRKCFGSTS *DEV to determine tape drive status
D: Use the WRKSYSSTS command to determine tape drive status
Correct Answers:?? C

The questions about exam 000-238 Certification are released ususlly by pass4sure.if you are preparing for passing exam 000-238,or want to know the new knowledge about exam 000-238,you ‘ll can visit our website pas4sure.

1.A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory, four 10/100/1000 TX LAN adapters, and six fibre channel adapters to external storage in an IBM ESS (Shark).?? They like the idea of being able to do SAN maintenance while not incurring downtime.?? If all LPARs are production related and similar, which question is most appropriate for the pSeries technical specialist to ask?

A: Would 10/100 Ethernets work as well?
B: Should there be eight fibre channel adapters?
C: Should there be an async adapter for heartbeat?
D: Will all LPARs need access to a common fibre channel tape drive?
Correct Answers:?? B

2.A hospital customer with an experienced AIX and Microsoft Windows staff wants to consolidate all of their file/print services onto fewer systems.?? They currently use multiple Microsoft Windows-based Intel systems that are experiencing reliability problems.?? They also have POWER4+ systems that are running multiple AIX LPARs that have experienced no reliability issues. They need at least 99.99% uptime. Which solution will meet their uptime needs at the lowest cost?

A: Combine the file/print servers onto a larger Intel-based machine (x445).
B: Bring up a Linux LPAR on the pSeries and run Samba to provide file/print services.
C: Bring up another AIX LPAR on the pSeries and run Samba to provide file/print services.
D: Bring up another AIX LPAR on the pSeries and run Connect Direct to provide file/print services.
Correct Answers:?? C

3.A customer left a message on the pSeries technical specialist’s voicemail that a proposal is needed for a p5-550 4-way 1.4GHz 8GB machine.?? The specialist configured a p5-570 4-way 1.5GHz 8GB machine and sent it to the customer with a note that this system was the closest match to that requested.?? What could the specialist have done to minimize any customer dissatisfaction in an efficient manner?

A: Configured a p5-550 1.65GHz 8GB machine and emailed it to the customer
B: Spoken to the customer about available machine options and verified which model was desired
C: Configured p5-550 4-way 1.65, p5-570 4-way 1.5, p5-570 4-way 1.65, and p5-570 4-way 1.9 systems to cover all options
D: Emailed the customer to let them know there is no 1.4GHz p5-550, attaching a copy of the pSeries Facts and Features guide
Correct Answers:?? B

4.A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated.?? The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage.?? Each system has the following:

? 2 integrated network ports ?
2 fibre channel adapter cards
? 1 power supply and redundant cooling
? HACMP v5.1

In addition to a second power supply, what further requirements, if any, are needed to validate this solution and ensure no single point of failure?

A: One fibre channel switch
B: Two fibre channel switches
C: Two Ethernet cards
D: Nothing
Correct Answers:?? B

000-238 test questions,named p5 and pseries technical sales support,Multiple choice question type,140 questions updated by pass4sure recently.pass-guaranteed.

The list of questions below is provided b pass4sure test engine.

1.A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory, four 10/100/1000 TX LAN adapters, and six fibre channel adapters to external storage in an IBM ESS (Shark).?? They like the idea of being able to do SAN maintenance while not incurring downtime.?? If all LPARs are production related and similar, which question is most appropriate for the pSeries technical specialist to ask?
A: Would 10/100 Ethernets work as well?
B: Should there be eight fibre channel adapters?
C: Should there be an async adapter for heartbeat?
D: Will all LPARs need access to a common fibre channel tape drive?
Correct Answers:?? B
2.A hospital customer with an experienced AIX and Microsoft Windows staff wants to consolidate all of their file/print services onto fewer systems.?? They currently use multiple Microsoft Windows-based Intel systems that are experiencing reliability problems.?? They also have POWER4+ systems that are running multiple AIX LPARs that have experienced no reliability issues. They need at least 99.99% uptime. Which solution will meet their uptime needs at the lowest cost?
A: Combine the file/print servers onto a larger Intel-based machine (x445).
B: Bring up a Linux LPAR on the pSeries and run Samba to provide file/print services.
C: Bring up another AIX LPAR on the pSeries and run Samba to provide file/print services.
D: Bring up another AIX LPAR on the pSeries and run Connect Direct to provide file/print services.
Correct Answers:?? C
3.A customer left a message on the pSeries technical specialist’s voicemail that a proposal is needed for a p5-550 4-way 1.4GHz 8GB machine.?? The specialist configured a p5-570 4-way 1.5GHz 8GB machine and sent it to the customer with a note that this system was the closest match to that requested.?? What could the specialist have done to minimize any customer dissatisfaction in an efficient manner?
A: Configured a p5-550 1.65GHz 8GB machine and emailed it to the customer
B: Spoken to the customer about available machine options and verified which model was desired
C: Configured p5-550 4-way 1.65, p5-570 4-way 1.5, p5-570 4-way 1.65, and p5-570 4-way 1.9 systems to cover all options
D: Emailed the customer to let them know there is no 1.4GHz p5-550, attaching a copy of the pSeries Facts and Features guide
Correct Answers:?? B
4.A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated.?? The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage.?? Each system has the following:
? 2 integrated network ports ?
2 fibre channel adapter cards
? 1 power supply and redundant cooling
? HACMP v5.1
In addition to a second power supply, what further requirements, if any, are needed to validate this solution and ensure no single point of failure?
A: One fibre channel switch
B: Two fibre channel switches
C: Two Ethernet cards
D: Nothing
Correct Answers:?? B